Скачать с ютуб Hood Graphic Installation Instructions в хорошем качестве

Hood Graphic Installation Instructions

Shop at https://www.adventurelifedecals.com Minimum application temperature +40° F Applied decal temperature range -40°F to +180°F Optional Steps for the hood decal without cutouts for the windshield bumpers: • Pop. your hood, remove the heat shield, unplug the washer fluid hoses, use a wrench or socket to undo the bolts and use pliers to pinch and push the bumper out. • Pinch the washer nozzle tabs and remove it as well. Steps: 1. Clean the area with water, dish or baby soap, and isopropyl alcohol. Dry with a lint-free microfiber cloth. 2. Place the graphic with the paper backing on your hood and use masking tape to keep it in place. 3. Peel the back half of the graphic back (closer to the windshield), cut the paper backing off, and use your squeegee to press the graphic down. 4. Remove the masking tape and remaining paper backing. 5. Apply a little heat to the graphic, pull to the front, and tack it down by pressing the graphic onto the hood. 6. Use your squeegee to apply the graphic, starting at the back and working towards the front. TIP: Pull the graphic with one hand to keep tension on the graphic while using your squeegee to tack the graphic. If you have issues with a crease or fold; peel the graphic back, apply a small amount of heat, and try again. 7. Tuck the back edge around the hood and finish the graphic with some heat to maximize the adhesive bond.