HOW TO INSTALL: TUbliss Installation Guide скачать в хорошем качестве

HOW TO INSTALL: TUbliss Installation Guide

This video is only intended to show how the installation looks and we ask that you PLEASE follow the PRINTED INSTRUCTIONS in their entirety when actually performing the installation. Even if you have changed thousands of tires – IT IS CRITICAL to follow EVERY STEP on the printed instructions. Drill 11mm (7/16″) hole exactly four spokes (either direction) from existing valve stem hole. If your rim has two 8mm holes that are four spokes apart, simply enlarge ONE of these holes to 11mm. Align the Rim lock with the 11mm hole and centre the Red Liner on the Rim. Align the Bladder Valve Stem with the 8mm hole and insert this 8mm Valve Stem into the Red Liner. By hand, begin at the Rim Lock and Install the Red Liner in the direction closest to the Black Bladder Valve Stem, until the Black Bladder Valve Stem is tight. Stand your Tyre upright against your Legs and hang the Guide Plate onto the Rear Bead of the Tyre. Hold the Rim with the Rim Lock at the Bottom Position (Opposite where you are holding the Rim with your hand). Now push down on the Top of the Tyre with your other hand while you push the Rim into the Tyre between the Guide Plate and the Outer Bead of the Tyre. Insert the valve Cores, inflate the Black Inner Bladder to 7,5 bar/100 Psi. Social Media: Facebook:   / thedirtbikerider   Instagram:   / thedirtbikeriderofficial   Main Channel:    / thedirtbikerider