Parkside PHPA 20-LI A1 trigger linkage broken fix (all mistakes included) скачать в хорошем качестве

Parkside PHPA 20-LI A1 trigger linkage broken fix (all mistakes included)

STL (model by ThomasLTboom): https://www.printables.com/model/9807... Left all my hardships in uncut (im bad at edditing) so you can see what can go wrong and how to work around it. Chapters: 0:00 - Bad introduction, explaining what happened 0:40 - Start of explaining how to take it apart (i know i can't count) 1:08 - Gluegun shell spacer (don't lose it) 1:57 - Black spring (provides return tension for feeder) 2:28 - Showing broken linkage 2:34 - Telling what you can do (reinforce, glue, epoxy, 3d print or remanufactur from different material) 3:15 - How to remove linkage arm from assembly 3:42 - Examples of how you can fix it 3:57 - Sizes of the holes of linkage arm 4:28 - 3D print (my way of fixing it) part showcase 5:05 - Greasing linkage pivot 5:25 - Assembling assembly (needed to ream out the holes) 6:40 - Reassembling spring 6:50 - Installing assembly into shell 7:50 - Assembly orientation 9:32 - Closeup full assembly 10:10 - Rejoining shell 10:55 - Back rail aligning (red piece) 11:20 - The start of trouble shooting ( gap in shell, and stuck trigger) - Skip to 21:52 for the fix 21:40 - Showing it unjammed (perfectly fixed) 21:52 - Showing what the issue was 24:23 - Finishing up 24:30 - Always bring spares (if they break in the field, its a pain in the rear end) Note you can technicaly store a spare inside of the shell, theres enough space. This is what i did. Please don't judge my dexterity, working with non-skintight gloves is hard.