Скачать с ютуб Rx-D User Guide 4.2 Single Channel Pairing в хорошем качестве

Rx-D User Guide 4.2 Single Channel Pairing

4.0 EASY PAIRING Before the Rx-D can be used wirelessly it must first be paired with the users uniquely coded Txi-Ds. Use Single Channel Pairing to pair Txi-Ds with the preferred Rx-D channel LED colour. Use Multi-Channel Pairing to pair up to 4 Txi-Ds with one Rx-D channel LED colour differentiated visually by 1-4 flashes. 4.1 HOW TO PAIR – First ensure that the Rx-D & Txi-Ds to be paired are all switched OFF. Set Responses to a low level and Volumes to medium. Important – The Rx-D will switch itself OFF automatically with nothing memorised if at any stage of Easy Pairing there is a delay of more than 45 seconds or if Easy Pairing is not completed. If an error is made before Pairing Completion switch OFF manually or wait for automatic switch OFF. Recommence Easy Pairing. 4.2 SINGLE CHANNEL PAIRING – Switch the Rx-D ON. The Purple LED flashes continuously indicating Single Channel Pairing Mode. If the Purple Channel is to be paired, switch ON the first Txi-D within a metre of the Rx-D to transmit the code. If the Purple Channel is not to be paired, press and release PB1 until the required channel LED flashes and switch on the appropriate Txi-D. When the code is accepted, it is confirmed audibly and the next channel’s LED will start flashing. Note – The Rx-D will only allow pairing with one unique Txi-D code at a time. Any further transmissions of the same code will result in an audible error message. Continue pairing as required and complete by pressing and releasing PB1 through all LED channels (including Yellow) until Pairing Completion is confirmed.