How To: Brake Bleeding Procedure for Calipers with Two Bleeder Screws (Brembo/Wilwood/Baer) скачать в хорошем качестве

How To: Brake Bleeding Procedure for Calipers with Two Bleeder Screws (Brembo/Wilwood/Baer)

In this video, Landan explains the procedure for bleeding brake calipers with two bleeder screws. This process is very similar to a brake caliper with one bleeder screw, except you have an extra bleeder to bleed. With two bleeder screws, always start with the insider bleeder screw first, followed by the outside bleeder screw. Shop Mustang Brake Parts: https://lmr.com/products/Mustang-Brakes Purchase Brake Bleeder Kit: https://lmr.parts/LRS-TX19200 The correct order to bleed the brake calipers is as follows: 1. Passenger Rear Caliper 2. Driver Rear Caliper 3. Passenger Front Caliper 4. Driver Front Caliper Tool List Lift or Jack & Jack Stands Microfiber Towels & Brake Clean Flare Nut Wrench Set Brake Bleeding Kit Chapters Intro - 0:00 Video Explanation - 0:14 Lift the Vehicle & Remove the Front Wheels - 0:43 Add Fluid to the Master Cylinder - 0:48 Bleeding the Passenger Side Rear Caliper - 1:02 Bleeding the Driver Side Rear Caliper 1:48 Bleeding the Passenger Side Front Caliper - 2:01 Bleeding the Driver Side Front Caliper - 2:10 Final Thoughts & Outro - 2:41 #lmr #brembo #brakes Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-vide...