Enable Dual Receive and Dual Transmit for the new revision of Pluto скачать в хорошем качестве

Enable Dual Receive and Dual Transmit for the new revision of Pluto

This video will walk you through how to enable the 2nd Rx and the 2nd Tx channel of the new revision of Pluto: Rev C. If you have Rev B, it won't work. You can only get the 2nd channels with Rev C or later. We'll go through 4 steps: 1. Update the firmware 2. Set the environmental variables 3. Add the u.FL to SMA connectors 4. Simple Python example Here's the links used in the video: https://wiki.analog.com/university/to... https://wiki.analog.com/university/to... https://wiki.analog.com/university/to... https://wiki.analog.com/university/to... https://www.digikey.com/en/products/d... https://wiki.analog.com/sdrseminars https://analogdevicesinc.github.io/py... https://github.com/analogdevicesinc/p... Example in Python: https://github.com/jonkraft/PlutoSDR_... Chapters: 0:00 Introduction to the new Pluto "Rev C" 2:02 Check your Pluto Revision 3:14 Step 1: Update Pluto's Firmware 4:41 Step 2: Set Pluto to AD9361 7:18 Step 3: Add SMA's to Rx2 and Tx2 8:57 Step 4: Install Pluto drivers and Python libraries 10:14 Example Python program using both channels