Problem diluar NURUL_Unit tidak bisa swing ke kiri dan kekanan_Excavator komatsu_PC200-8_KENAPA INI скачать в хорошем качестве

Problem diluar NURUL_Unit tidak bisa swing ke kiri dan kekanan_Excavator komatsu_PC200-8_KENAPA INI

Problem diluar NALAR_Unit tidak bisa swing ke kiri dan kekanan_Excavator komatsu_PC200-8_KENAPA INI METHOD FOR CHECKING SWING PINION GREASE LEVEL, ADD GREASE Items to be prepared Scale 1. Perform the swing 3 times each to the right and left, and stop the machine. 2. Remove the bolts (1) (2 pieces) on top of the revolving frame, and remove the cover (2). When removing the cover, be careful not to let any dirt or soil stick around the cover enter into the inspection hole. 3. Insert the ruler (3) into the grease through the inspection and adjustment hole (A). Check that the grease amount (S) in the area where the pinion passes is 9 mm {0.354 in}  or more. Add grease if the grease amount (S) is 9 mm {0.354 in}  or less. 4. Check that the grease is not milky white. Total amount of grease14.6 ℓ {3.86 U.S.Gal}  If the grease is milky white, it needs to be replaced. Ask your Komatsu distributor to replace it. 5. Install the cover (2) with bolts (1). Check that there is no dust in the bolt hole. Remove it completely if there is any. Do not let any sand, soil, dust enter into the inspection hole when installing the cover. #PC200 #Cantswing #pinionbroken