Build Your Power Egyptian Piramid скачать в хорошем качестве

Build Your Power Egyptian Piramid

After being inspired by the articles about Pyramid Energy and effect that can create, probably you would like to conduct your own experiments with your own power pyramid. The task is not difficult at all, since it does not require much time, cost or effort to build your own energy pyramid. You can use any material you like, paper, wire, plastic, copper, cardboard, etc. The power pyramid can be of any size. Still, you need to respect some rules. Firstly, your pyramid will have to be the exact proportional replica of the Great Pyramid of Gizeh. Start with choosing your desired height of pyramid ( h ). The Length of the base is a = h x 1,5708. The length of the energy pyramid side is s = h x 1,4949. For reference check the fig (1). Still, if you do not want to do a calculation, check a table with pre-calculated dimensions. You can use any measurement units, cm, inches, feet, ... After you choose dimensions of your energy pyramid, take your material and build your model. Try to use no artificial glues. If you are building cardboard model, the easiest method is to draw four connected triangles as shown on the fig ( 2 ). This method is simple, just cut your drawn triangles. You have to glue only one side of pyramid. After you built your power pyramid it is time for pyramid energy experiments. During your experiments always position your energy pyramid in north-south direction, fig (3) While placing objects in the power pyramid, put them on 1/3 of height, since that is focal point of pyramid energy. Energy Pyramid should be placed on flat surface, not to close to electrical devices. Take some time and experiment in different ways. Results may fluctuate, depending of material, construction, positioning and duration of pyramid energy experiment. Experiment and discover all pyramid energy effects. diymariuselectro@gmail.com