How to Replace Valve Cover Gasket 2007-2011 Toyota Camry (2.4L L4) скачать в хорошем качестве

How to Replace Valve Cover Gasket 2007-2011 Toyota Camry (2.4L L4)

Buy Now! New Valve Cover Gasket Set from 1AAuto.com https://trq.video/ie-1AEGS00177 This video shows you how to install a new valve cover gasket from TRQ on your 2007-2011 Toyota Camry (2.4L V4). Valve covers will begin to leak oil when the seals eventually break down. A new valve cover gasket set will make sure the oil stays inside the engine where it belongs! This repair was done on a 2007 Toyota Camry SE 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles: 2007 Toyota Camry 2008 Toyota Camry 2009 Toyota Camry 2010 Toyota Camry 2011 Toyota Camry Tools you will need: • Flat Blade Screwdriver https://trq.video/obwh-1AXAA00013 • 10mm Socket https://trq.video/obrg-1AXAA00017 • Trim Tool Set https://trq.video/oak3-1AXXX00006 • Vise-Grips • Pliers • E5 Socket • Ratchet https://trq.video/obRa-1AXAA00016 • Torque Wrench https://trq.video/oaUD-1AXAA00044 • Cloth Rags https://trq.video/oHM-1AXSS00035 • Gloves https://trq.video/oaAq-1AXSS00048 • RTV • Safety Glasses • Razor Blade / Gasket Scraper Subscribe:    / @trq   Check out our playlist: Toyota Camry 2007-2011 6th Generation:    • Toyota Camry 2007-2011 6th Generation   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.