Door Bell Installation Guide - Demo With MK S4338WHI Door Bell. скачать в хорошем качестве

Door Bell Installation Guide - Demo With MK S4338WHI Door Bell.

Door Bell Installation Guide - Demo With MK S4338WHI Door Bell. 10 Easy DIY Steps On How To Remove Existing Door Bell - Demo With MK S4338WHI Door Bell: Step 01 - Use a flat heat screwdriver to open the battery compartment. Step 02 - Remove the battery compartment. Step 03 - Use the tip of the screwdriver to remove the faceplate. Step 04 - Remove the screws on both sides. Step 05 - Take a photo of the existing wiring. Step 06 - Remember the wire connection. Step 07 - Use a marker to mark the positive wire. Step 08 - Remove both wire. Step 09 - Remove surface box’s mounting screws. Step 10 - Remove the surface box. 10 Easy DIY Steps On Installation Of Door Bell - Demo With MK S4338WHI Door Bell: Step 01 - Put the wires through the surface box. Step 02 - Mount the surface box with a long screw. Step 03 - Tighten the screw. Step 04 - Take note of the wires connection. Step 05 - Secure the wires by tightening the screws. Step 06 - Double check the wires are properly secured. Step 07 - Install the door bell. Step 08 - Make sure the face plate orientation is correct. Step 09 - Press against the face plate to click in. Step 10 - Insert the battery compartment. Easy DIY Hacks To Reduce Door Bell Volume - Demo With MK S4338WHI Door Bell: Step 01 - Prepare a piece of tissue paper, kitchen towel or cloth. Step 02 - Prepare some tape. Step 03 - Fold into desire size. Step 04 - Apply tape on both sides. #DIY #HDB #BTO #CONDO #EC #CHIMES #BELL #DOORBELL #MK