GRS TOS Switchable 4-to-8-way Restrictor Gate and GRS USB Button Hole Spinner Review & Mod скачать в хорошем качестве

GRS TOS Switchable 4-to-8-way Restrictor Gate and GRS USB Button Hole Spinner Review & Mod

Check out the review of Stefan Burger's 4 to 8-way motorized restrictor gate changer and the GRS USB Button Hole Spinner and see how I modded an AtGames Legends Ultimate, Legends Gamer Pro, and an Arcade1Up. ***UPDATE: GRS now offers a new swappable board for the GRS V1 and V2 Buttonhole Spinner and GRS Buttonhole Push Pull Spinner. https://thunderstickstudio.com/produc... **UPDATE: This has now been mass-produced, repackaged, and officially made available as a GRS product: https://www.amazon.com/ThunderStick-T... ***UPDATE: The gate changer will also work with the Legends Pinball joystick control panel. ***UPDATE: The GRS Button Hole spinner Version 2 will work but is a bit too sensitive with Legends products. If you can find Version 1(TS-BSP01) that is recommended. Only Version 2 (TS-BSP02) is sold direct from thunderstickstudio.com. I have also tested the GRS push-pull spinner Version 1 (TD-DOT-01) and Version 2 (TS-DOT-02). Version 2 is too sensitive for Legends products. Also, the push-pull functionality will NOT work on Legends products. It can be used as a spinner only. PARTS USED (updated to reflect official GRS products): ThunderStick TOS GRS Switchable 4-to-8-Way Restrictor All in One Kit: https://www.amazon.com/ThunderStick-T... ThunderStick TOS GRS Switchable 4-to-8-Way Restrictor Extension kit: https://www.amazon.com/ThunderStick-S... Arcade Joystick - 4-to-8-way switchable restrictor - Configuration Tool Video:    • Arcade Joystick - 4-to-8-way switchable re...   Arcade Joystick - 4-to-8-way switchable restrictor - Firmware update Video:    • Arcade Joystick - 4-to-8-way switchable re...   Software & Firmware Download: https://www.thingiverse.com/thing:424... GRS USB Button Hole Spinner: https://www.amazon.com/GRS-USB-Button... ADDITIONAL PARTS USED FOR GAMER PRO MOD: I used the Gamer Pro supplied USB cable to connect from the back of the Gamer Pro control deck to the Sabrent USB hub inside the control deck. (2) Sabrent 4 Port USB 2.0 Hubs: https://www.amazon.com/gp/product/B00... 15 ft. USB 3.0 extension cable: https://www.amazon.com/gp/product/B08... OVERVIEW OF GAMER PRO MOD: Use the supplied gamer Pro USB cable and connect it to the USB port on the back of the Gamer Pro and feed the cable inside the control deck to the USB hub. The GRS gate changer's Arduino board and GRS spinner will plug into the hub inside the control deck. Then the hub's USB cable feeds out the back of the control deck through the same hole that the other USB cable feeds into. I then connected the female-to-male USB extension cable to the hub's USB cable coming out of the back of the control deck. The extension cable connects to a powered or passive hub on the other end. That hub is plugged into the Core.