How to Service an RO System | Kleen-Rite скачать в хорошем качестве

How to Service an RO System | Kleen-Rite

It's important for Car Wash operators to know how to service RO SYSTEM, it can save you lots money and time. in today's TOM'S WAY we will show you how: How to service an RO SYSTEM Your Filters should be changed every 6 month, here is how: -Unscrew the Pre-Filter counter clockwise until it comes off. You may need to use a wrench or hammer to get it started. -Take out the old filter and swap with a new one. -Hand tighten back on, then push in the bleeder valve to release excess air, hold until you get water. -Now you need to change the filter in your Membrane. Use 2 wrenches to loosen the nuts on the collar. -After the collar is off, grab the nipple on the filter with your plumber's plyers and turn and pull at the same time. -Once the filter is loose, pull it all the way out and discard. -Insert your new filter into the membrane. Be sure the O-ring seal is at the TOP when inserted. -Before placing the cap back on, check the O-ring seal on the cap and replace if needed. -Push the cap down until it seats itself. Then put the collar back on. Turn water and power back on. Kleen-Rite Corp., Your Reliable Supplier For The Car Wash Industry http://www.kleen-ritecorp.com/c-790-d...