DIY washing Machine скачать в хорошем качестве

DIY washing Machine

DIY Washing Machine. Based on PappaPreppers design with some changes. I used 3/4" galvanized conduit with 2 hubs so a pole wouldn't be running through the washer. We'll see how they withstand rust. Make sure you smooth all you drill holes, cuts, and cut off any screws/bolt sticking into the white barrel, so nothing snags your clothing. I can get this baby spinning, but it wants to take off. Any ideas on how to secure so I can really spin my clothes? Things I'd change... I'd make my stand a bit higher. I'd cut the blue barrel opening larger. Put drain in middle bottom of blue barrel, not on the end. You want it at the lowest point. I could have done this much better. Add a large drain or it drains a bit slow. I still need a slip to put around the turning handle. , so next time I'd reduce the handle to 1/2" so it won't be so big in your hand with a cover over it. My costs..$50 barrels, 3/4" x 4" galvanized steel nipples (2), $3.64, bronze chest latches (2) $3.51, 3/4" 90 degree elbow fittings (2) - $7.52, 3/4" x 5" steel nipple (1) - $4.96, 3/4" x 8" nipple $7.94, 3/4" black iron cap $4.70, Siemens 3/4" Type RX Hub (2) - $13.90. I had to buy a 2x4 for about $3.75. Old hinges I had and used old stuff lying around for spacers. Total cost about $100 depending on what you have to buy. Luckily I had all the tools I needed.