Durafly TUNDRA - Part 4 [ Power Upgrade ] скачать в хорошем качестве

Durafly TUNDRA - Part 4 [ Power Upgrade ]

If blocked watch on Vimeo ▶▶ Use: Show more for full setup info! ------------------------- Here are the full specs for the Power-upgrade in the Durafly Tundra: Stock: Aerostar 900 kV (Length 51mm) 141 gram Test data: 36A / 429W / 1880gram thrust. Upgrade: Aerodrive SK3 - 3542-1000kv (Length 49mm +2mm) 155 gram Test data: 39A / 455W / 2090gram thrust https://goo.gl/kLxRn7 [ Update: be aware there's now a new version 2 of the SK3 3542 1000kV that does not have a bolt-on adapter. Use the old v1 https://goo.gl/kLxRn7 alternative you can use a v1 3542-1185Kv: https://goo.gl/Wwxi1Q Please note that this 1000Kv motor is rated at 45A / 670W So there's the option to run it with a bigger prop, or go with 4S (I have used this motor in another airframe with a 12x6 / Plush 60A on 4S, but for the moment I'm satisfied with the Tundra on 3S) Used Lipo: Zippy 3S 1800mAh 40C Used ESC: Hobbywing Platinum 50A V3 Brushless ESC w/7A BEC HK: https://goo.gl/ec47UT BG: https://goo.gl/EtvWFN Until now I have only used standard settings, micht get more out of it with adjusting timing. If you don't fly WOT al the time you might be able to use the stock ESC.. as with everything: at your own risk. Some alternative suggestions: HobbyKing 50A BlueSeries HobbyKing 50A ESC 4A UBEC Plush 60A (if you want to go crazy on 4S, check on motor temp) Optional setup from Banggood: https://www.banggood.com/EMAX-GT2812-... Together with a 40A Hobbywing ESC this makes a nice setup: https://www.banggood.com/HOBBYWING-FL... Spinner: Spinner 40diam / 5mm shaft PRODUCT ID: Spin-40-5 https://goo.gl/bvN6d2 Note: adds about 16,5 gram extra weight Note: This does NOT fit on the stock motor / adapter ! You need an extra (prop) center ring. Always use blue locktide on metal screw that go in to metal! Paint touch up: Vallejo model color 70.968 flat green / RAL 6002 The thinner I used eats the surface of the EPO a bit, and makes it sticky. Multiplex sells expensive MULTIprimer for Elapor, wich is basicly just synthetic thinner mixed with a sort of silver paint. Sidenote: I also tested the SK3 3536-1050kV but the 12x6 is to big. Have any other suggestions: let as all know! Thanks for watching, give a thumbs up if you find this info useful! Song credits: Down To The Bone - Staten Island Groove