How to replace the Front Upper Control Arms 2002 - 2008 Dodge RAM 1500 🚗 скачать в хорошем качестве

How to replace the Front Upper Control Arms 2002 - 2008 Dodge RAM 1500 🚗

Find the parts used in the video on CarParts.com just there https://carparts.solutions/RAM1500Gen3 Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS ⚙️ NEEDED CARPARTS AND PRODUCTS Upper control arm: https://carparts.solutions/UpperContr... Penetrating oil: https://carparts.solutions/Penetratin... Silicone grease 💪 TIGHTENING TORQUES Camber bolts, 2002 through 2005 models : 97 Ft-lbs Camber bolts, 2006 through 2008 models : 130 Ft-lbs Upper control arm ball joint retainer nut, 2002 through 2002 models : 60 Ft-lbs Upper control arm ball joint retainer nut, 2003 through 2008 models : 40 Ft-lbs + 90° Wheel lug nuts: 95 Ft-lbs 🛠 TOOLS The toolbox recommended by CARPARTS.COM to repair your Dodge RAM 1500: https://carparts.solutions/ToolBox List of the tools we used to replace the Front Upper Control Arms on a Dodge RAM 1500: Hydraulic jack: https://carparts.solutions/FloorJack Jack stands: https://carparts.solutions/JackStands 21 mm wrench 8 mm wrench Ball joint puller Marker Measuring tape Wheel lug wrench Torque wrench: 20 to 250 Ft-lbs https://carparts.solutions/TorqueWren... 100 to 600 Ft-lbs https://carparts.solutions/TorqueWren... Ratchet Flat head screwdriver 10 mm socket Wire brush Don't forget to subscribe:    / @carpartscomofficial   🛻 COMPATIBLE VEHICLES The operation and tools displayed in the video should be available on the following vehicles : 2002 RAM 1500 2003 RAM 1500 2004 RAM 1500 2005 RAM 1500 2006 RAM 1500 2007 RAM 1500 2008 RAM 1500 📽 🛠 USEFUL VIDEOS 🛠 📽 How to jack your 2002 - 2008 Dodge RAM 1500 safely? ⬆ 🚗 :    • How to jack your 2002 - 2008 Dodge RAM 150...   ⚠️ CARPARTS.COM'S INFOS In order not to damage the bushings, it is necessary to tighten the front retaining bolts in the "vehicle on the ground" position. During this operation, you will be intervening on the front axle of your vehicle, so it is advisable to perform a wheel alignment afterwards. 🚨 DISCLAIMER This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area. 📚 CHAPTERS 0:00 Intro 0:13 Measure the distance between the center of your wheel and the wheel arch 0:24 How to pull up your RAM 1500 0:37 Loosen the upper control arm camber bolts 1:19 Unscrew the upper ball joint 2:02 Remove the camber bolts 2:12 Remove the control arm + cleaning 2:31 Put the upper control arm back 2:46 Put the camber bolts back 3:25 Put the upper ball joint back 3:45 Tightening torques 4:24 Put the last components back 4:44 Put your RAM 1500 back on the ground