How to Build a Homemade Track Saw | Ask This Old House скачать в хорошем качестве

How to Build a Homemade Track Saw | Ask This Old House

Ask This Old House general contractor Tom Silva demonstrates an easy way to make a track for any circular saw. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 10 minutes Cost: $10 Skill Level: Moderate Tools List for Building a Homemade Track Saw: Circular saw Shopping List: Plywood Wood glue Steps: 1. Cut a thin piece of the plywood with the circular saw and attach it to the top of the rest of the plywood using wood glue. Be sure to have excess plywood on both sides of the glue joint. 2. Place the circular saw on one side of the straight edge and cut the excess plywood. 3. Flip the board and repeat on the other side of the circular saw. Resources: Tom used scrap plywood and extra wood glue, but these items could also be bought at a home center. About Ask This Old House TV: Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook. Follow This Old House and Ask This Old House: Facebook: http://bit.ly/ThisOldHouseFB Twitter: http://bit.ly/ThisOldHouseTwitter http://bit.ly/AskTOHTwitter Pinterest: http://bit.ly/ThisOldHousePinterest Instagram: http://bit.ly/ThisOldHouseIG http://bit.ly/AskTOHIG Tumblr: http://bit.ly/ThisOldHouseTumblr For more on This Old House and Ask This Old House, visit us at: http://bit.ly/ThisOldHouseWebsite How to Build a Homemade Track Saw | Ask This Old House    / thisoldhouse