Even easier and more beautiful! No plastic board! How to make a new acrylic stand [Homemade goods] скачать в хорошем качестве

Even easier and more beautiful! No plastic board! How to make a new acrylic stand [Homemade goods]

I wonder if it's possible to make Axta even more beautifully and easily? After thinking about it for a long time and making prototypes over and over again, I made many failures. Finally, I was able to upload how to make the 4th Akusta. -------------------- Tips on how to make it -------------------- For instructions on how to create the image, please refer to the related video below on how to make pepasta. Paper for home use or convenience stores can be used, but glossy paper is recommended. The color will be slightly darker due to the resin. If you are concerned about this, I think it would be a good idea to print it a little brighter. I was able to make three 11.5cm pieces using Daiso's resin liquid. This time, there are almost no large air bubbles on the surface. Because it goes in the back heating the resin Remove air bubbles well Cover with dust and sunlight and wait at least 10 minutes (the longer the better) If you follow this, you can make it beautiful I used a 100 average UV light. It is the perfect size to fit the official Axta. The edges are less exposed to light and are more likely to have poor curing. Change the angle and let it harden until it's too much. Deburring Palm from the surface side with burrs to the back side. Does not easily peel off from the surface Please do it gently and don't force yourself. The pedestal is simple, but it sticks easily. Once it hardens slightly, pull it out as soon as possible. After removing it, remove the masking tape and let it harden from the back as well.