HP8300 Hard Drive Replacement скачать в хорошем качестве

HP8300 Hard Drive Replacement

Step by step instructions: 1. Loosen the fastening screw on back of case to remove side panel. 2. Unplug the blue SATA and power cable from the back of the optical disc drive. 3. Loosen green tabs on faceplate and pull back to remove faceplate. 4. Pull green tab on side of disc drive to release the drive, then slide the drive out and set aside. 5. Squeeze the tab on top of the hard drive carriage, then pull up to remove. 6. Use a straight screwdriver to remove the four screws from the hard drive carriage, then slide hard drive out of carriage. 7. Slide replacement hard drive into carriage and align screw holes, then replace screws. 8. Place hard drive carriage into its spot and push the tab down to lock into place. 9. Slide the optical disk drive back into its slot. Squeeze the green tab until the drive is fully inserted, then release the tab to allow it to lock. 10. Plug the SATA/power cable into disk drive. 11. Replace the faceplate, aligning the three small black tabs on faceplate with three holes on front of computer. Ensure the green tabs click into place. 12. Replace the side panel and tighten fastening screw.