Can-Am Outlander Axle Replacement | Demon Axle Installation | ATV Axle Replacement | Partzilla.com скачать в хорошем качестве

Can-Am Outlander Axle Replacement | Demon Axle Installation | ATV Axle Replacement | Partzilla.com

See how to replace the axles on a Can-Am Outlander in this video from Partzilla.com! This Outlander is getting some upgrades to get it ready for the swamp, and part of that is beefing up the drivetrain. Today, we’re replacing the OEM axles with a set of Demon axles for this Outlander. Now, if you're replacing with Can-Am Outlander OEM axles, the process is the same. But a quick note on these Demon axles: they’re corner specific, so you’ll order four different part numbers for this unit. Check below in our list of parts for more info. We’re starting on the right front, and we’ll walk you through breaking down the suspension system so that we can remove the old axle. Once we pull it, it’s a good idea to replace the oil seals around the axles, so we’ll knock that out. Then, it’s time to install the new Demon axle and get the suspension built back up. We’ll follow the same basic process on the right rear, except with a detour. We discovered the wheel bearing was shot, so we are going to replace it before we get the new axle in place and then build the suspension back up again. On the left side, the process will be just a mirror image of the right. Check our the parts we’re using here: Oil Seal: https://www.partzilla.com/product/can... Demon Powersports Axle (NOTE: These are corner specific. You will order a different part number from Demon for right front (PAXL-3063HD), left front (PAXL-3062HD), right rear (PAXL-3065HD), left rear (PAXL-3064HD): https://www.demonpowersports.com/prod... Can-Am Outlander Wheel Bearing: https://www.partzilla.com/catalog-pro... Circlip: https://www.partzilla.com/product/can... VIDEO HIGHLIGHTS: Introduction - 0:00 Removing wheels - 0:40 Disassembling front suspension - 1:40 Replacing axle seals - 4:40 Installing front Demon axle - 5:00 Disassembling rear suspension - 11:40 Replacing wheel bearing - 16:00 Installing rear Demon axle - 25:00 Buy OEM Can-Am ATV parts here: https://www.partzilla.com/catalog/can... Talk to us: X:   / partzilla   Facebook:   / partzilla   Instagram:   / partzilla   In the video we’re working with a 2019 Can-Am Outlander 1000R, but you will have similar steps for your Outlander dirt bike. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you.