Robotiq Gripper Integration on UR5 in ROS2 – From GitHub to Complete Setup in Gazebo скачать в хорошем качестве

Robotiq Gripper Integration on UR5 in ROS2 – From GitHub to Complete Setup in Gazebo

Do you want to automatize industrial processes with robotics but you don't even know where to start? You can become a Robotics Software Engineer thanks to the Master Program! Check out all the information here: https://www.learn-robotics-with-ros.com/ if it is not working use this: https://learn-robotics-with-ros-s-sch... Ready? Enrool now! If you have any doubt and need additional information book a free call with me or reach me out via email! Book a call: https://calendly.com/ros-master-ai/30min Reach me out via e-mail! ros.master.ai@gmail.com I will guide you for FREE through your transformation! ============================================================ 🚀 Want to simulate your own industrial robot application in ROS 2? Start here. In this step-by-step tutorial, you'll learn how to create MoveIt package with MoveIt setup assistant for UR5 and how to create a launch file to spawn the robot in Gazebo interacting with MoveIt. Then we will see how to setup properly the interactive marker in MoveIt! here the link for the GitHub repository of the package that we have created in this tutorial: https://github.com/LearnRoboticsWROS/... Remember to install these packages in your system: sudo apt install ros-humble-ros2-control sudo apt install ros-humble-ros2-controllers sudo apt install ros-humble-gripper-controllers sudo apt install gazebo sudo apt install ros-humble-gazebo-ros2-control sudo apt install ros-humble-gazebo-ros-pkgs sudo apt install ros-humble-xacro sudo apt install ros-humble-rmw-cyclonedds-cpp sudo apt install ros-humble-sensor-msgs This tutorial is perfect if you're a student, engineer, or robotics enthusiast looking to bridge the gap between existing open-source code and your own robotic simulation needs. 🔧 Turn someone else's code into your own robotic solution. 🎯 Master the workflow every ROS developer should know. 📦 Repos, commands, and links below 👇 Don’t forget to like, subscribe, and drop your questions in the comments! But this is just the tip of the iceberg! If you want to take your robotics skills to the next level and become a Robotics Software Engineer using ROS and ROS2, you'll need to dive deeper. Imagine improving your company's productivity and mastering your career! That's why you should totally check out the Masterclass for Robotics Software Engineers, which is currently under construction. This masterclass includes 15+ in depth modules (which the first 10 already available) covering advanced sensing, enviroment processing, and robotics development. Don't miss out on this opportunity to supercharge your carrer! https://www.learn-robotics-with-ros.com/ 😃Enjoy your robot programming experience! 🙏 Support the channel with a donation: https://bit.ly/3OcXK6R Topics: 00:00 Introduction 01:00 The ROS2 Robotiq gripper repository 10:35 Modify the repository for our needs 28:10 Create the Launch file 32:00 Test Check out the ROS2 basic tutorial GitHub repository https://github.com/LearnRoboticsWROS/... Repository for the package ur_yt_sim: https://github.com/LearnRoboticsWROS/... Repository for the ROS2 robotiq gripper from Picknik Robotics: https://github.com/PickNikRobotics/ro... 💖If you like this video make sure to subscribe and give a thumbs up and consider to donate to benefit a 1 to 1 discussion about your robot application (https://bit.ly/3OcXK6R).