Скачать с ютуб Bitcoin Space Heater Build Video в хорошем качестве

Bitcoin Space Heater Build Video

Build Video for the #BitcoinSpaceHeater Donations & Support: https://donations.schnitzel.world/ Idea Create a space heating solution based on an Antminer S9 which is completely or near silent. Reuse existing parts of a stock S9 Use parts that are easily and widely available or are 3D printed Simple and low complex solution. Goal for anybody to build this at home Completely Open Source Find all the 3D print files at https://github.com/NakamotoHeating/Bi... 00:00 Intro 00:59 Parts List 04:45 Miner Dissasembly 08:29 Miner Cleaning 13:58 Radiator Mounts 17:25 Injector Plates 22:44 Pump Power Connection 27:46 Miner Reassembly 32:01 Tube Installation 43:48 Fan Installation 46:35 Power-supply Installation 48:17 Ethernet & Bitcool 51:23 Power-supply Mounting 52:31 Finishing Parts list Picture of Parts list: https://github.com/NakamotoHeating/Bi... 1. Antminer S9 2. Power Supply (we used Antminer APW3++) 3. ABS 3D printed Top Cap 4. ABS 3D printed Bottom Cover 5. 6x ABS 3D printed Power Flow Plug 6. 4x 12mm Spring Clamp (https://www.amazon.com/dp/B0753YG7SJ) 7. 3x G1/4 Tube Barb Connector (https://www.amazon.com/gp/product/B09...) 8. 360mm Computer Radiator (https://www.amazon.com/dp/B079DHJ91F) & Screws (come with Radiator) 9. 120mm Fans (we used Noctua https://www.amazon.com/dp/B00650P2ZC) and Fan Y-Cable (come with Noctua fans) 10. 1/2" OD x 3/8" ID Polyethylene Tube (https://www.homedepot.com/p/Everbilt-...) 11. 120mm Fan Grills (we used two coming with the S9, plus bought one https://www.amazon.com/Bgears-Cooling...) 12. 12V Submersible Pump (we used https://www.amazon.com/dp/B09Y2H3D71 but technically any pump with more than 800L/H and rated to higher temperatures than 60C should work) Tools list A. Tube cutter B. 5min Epoxy C. Soldering Iron & Solder D. Wire Stripper E. Screwdriver F. Nose plier G. Side cutting plier H. Two containers I. Heat Gun J. Brush