Blend Door Actuator Replacement Chevrolet Silverado, Tahoe, Suburban 2007-2014 скачать в хорошем качестве

Blend Door Actuator Replacement Chevrolet Silverado, Tahoe, Suburban 2007-2014

Today on 2CarPros we show you how to replace the blend door actuator motor on a Chevy Silverado, Tahoe, Suburban and this video guide will also work on a GMC Sierra, Yukon, and Yukon XL between the years of 2007-2014. To see the different locations go here https://www.2carpros.com/articles/rep... The HVAC control module will relearn the actuator limits whenever power is disconnected and re-connected to the module. Use the following steps to perform the calibration update: 1. Turn OFF the ignition. 2. Remove the battery positive voltage circuit fuse of the HVAC Control Module. IMPORTANT: The scan tool must be disconnected from the vehicle to properly perform the calibration procedure. If a scan tool is connected before this procedure is completed, then new calibration values will not be stored. Failure to wait 60 seconds will not allow the HVAC control module sufficient time to clear the old calibration values. 3. Wait 60 seconds. 4. Install the fuse. 5. Turn ON the ignition. 6. Wait 60 seconds before installing a scan tool. If you have any further interest please visit http://www.2carpros.com *Disclaimer: Please use all safety precautions Local Forecast by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...) Source: http://incompetech.com/music/royalty-... Artist: http://incompetech.com/