How to Install a Printed Sandblast скачать в хорошем качестве

How to Install a Printed Sandblast

How to Install a Printed Sandblast Tools you will need to Install a Printed Sandblast: • 3M Squeegee (Gold) • Olfa SVR-1 Silver Knife • Black Gator Blade • Unger Pro Squeegee Handle • Paper Towel • Spray Bottle (with soapy solution) • Printed Sandblast You can find all of these items for purchase on our website( http://sffonline.co.za/ ) Instructions Step 1 Prepare the glass by spraying soapy solution on the surface area that you will be sticking the Printed Sandblast onto. Step 2 Use the Black Gator Blade window scraper to remove all the dirt from the window, Squeegee the glass using the Unger Pro Squeegee Handle, wipe the ends dry with a paper towel. Step 3 Spray the soapy solution on the surface area that you will be sticking the printed sandblast onto. Step 4 This step requires additional assistance* With the help of an assistant remove the printed sandblast from the backing sheet gently, once removed, spray the printed sandblast generously with soapy solution. Step 5 Place the printed sandblast on the cleaned surface area and align it accordingly and stick. Step 6 Spray the top of the printed sandblast with the soapy solution and squeegee the glass using the Unger Pro Squeegee Handle. Remove all the water bubbles that have formed, and the excess soapy solution from the film. Step 7 Use the Olfa SVR-1 Silver Knife to trim of any excess printed sandblast. Once the excess is trimmed use the 3M Gold Card and paper towel to remove any excess water solution. Video by Bizzexpose Video Copyright of Solar Film Foundation(SFF)