DIY: Bolt EV Front Brake Replacement скачать в хорошем качестве

DIY: Bolt EV Front Brake Replacement

My Bolt EV started doing the "front end shudder" when driving at highway speeds. Upon researching the issue, several other Bolt owners experience this, too. It's caused by the front brake calipers not retracting, allowing the pads and rotors to come into contact unintentionally. I suspect the issue is exacerbated by aging flexible brake hoses that won't allow fluid to flow back to the reservoir. I decided to change out the front calipers, pads, rotors and flexible hoses rather than rebuilding since these parts cost relatively little for the Bolt. I purchased Raybestos calipers, pads and rotors, and genuine GM flexible brake hoses (GM Parts 95429929 (front left) and 95429939 (front right)). Tools needed: Jacks and Jack Stands 10mm open end or flare wrench 13mm open end or flare wrench Sockets: 11mm, 15mm, 19mm, 21mm Ratchet Wrenches Torque Wrench (30 - 118 ft.lbs range) Gloves DOT 3 Brake Fluid Brake Parts Lubricant Flexible Tubing & Small Container (for brake bleeding process) Shop Towels Recommended: Breaker Bar Impact Wrench Drain Pan CRC Disc Brake Quiet