DIY: BMW Power Steering Reservoir Leak Repair скачать в хорошем качестве

DIY: BMW Power Steering Reservoir Leak Repair

Video tutorial on how to repair the leak on the power steering reservoir found on BMW vehicles. This is a very common issue with a simple fix. The sign of failure in this situation is you will notice an excessive amount of power steering fluid residue around the cap area slowly working it’s way down the reservoir and finally to the components located directly underneath. This is normally caused by the failing gasket or o-ring in the cap and can be purchased for just a couple dollars. The gasket or o-ring is design to keep the oil in and keep the dirt out of the reservoir. This particular tutorial was done on a 1997 BMW 540i. Website: http://4diyers.com Facebook:   / 4diyers   Google Plus: https://plus.google.com/+4DIYers Twitter:   / 4diyers   Instagram:   / 4diyers   Tumblr:   / 4diyers   Pintrest:   / 4diyers   Tools/Supplies Needed: -small standard/flat screwdriver -clean cloth -new gasket or o-ring Procedure: -using a small standard/flat screwdriver, remove the o-ring or gasket from it’s location -take extra caution not to damage the sealing surface as this can cause a leak -clean the area of with a clean cloth -put the new gasket or o-ring into place and be sure the o-ring isn’t twisted wipe down the sealing surface on the reservoir -as for cleaning this residue off, you can use Spray Nine or some form of degreaser Thank you to all those who watch my videos and support my content. Don't forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week! © 4DIYers 2013 All Rights Reserved No part of this video or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author.