Hope Pro 4 Rear Hub Bearing Replacement Including Freehub - In Depth скачать в хорошем качестве

Hope Pro 4 Rear Hub Bearing Replacement Including Freehub - In Depth

0:00 What the video is about - This is a LONG video 0:56 Removing end caps 02:20 Removing the freehub from the hub 03:35 1mm spacer 04:20 Removing rubber seal (Disc side) 05:03 Removing the axle from the hub & bearing 07:00 Removing the bearing from the axle 08:45 Removing the remaining bearing 09:40 Quick look at the axle 09:57 How the hub looks without bearings 10:17 Removing labyrinth seal (Green ring) 10:43 Freehub pawl & spring removal 11:40 Freehub tube, need to be able to move it 12:50 Removing bearings from freehub 14:55 Bearing details sizes etc 17:36 Why you should press the freehub bearings in too much 17:55 Installing freehub bearing with cheap tools 24:15 Close up of bearing after install 25:02 Don't forget the tube/spacer 25:45 Important part 26:25 2nd freehub bearing install with a press 29:14 Make sure the tube can move 29:26 Install labyrinth seal (Green ring) 30:00 Clean pawls and springs 30:21 Surface rust 30:51 Installing freehub pawls and springs 32:32 You will need a deeper press tool or long socket 33:40 Installing hub bearing, freehub side 35:51 Close up of the 1st hub bearing after install 36:18 Installing hub bearing, disc side 40:23 Close up of the 2nd hub bearing after install 40:30 Install the rubber seal 41:02 1MM SPACER!! 41:20 Installing your freehub 41:55 Installing labyrinth seal (Green ring) 42:55 All finished https://www.hopetech.com/_repository/...