"DON'T RECOMMEND" Under Performing NEJE E40 12W+ Diode Laser CUTTING TEST 3mm Plywood скачать в хорошем качестве

"DON'T RECOMMEND" Under Performing NEJE E40 12W+ Diode Laser CUTTING TEST 3mm Plywood

NEJE E40 12w+ Fixed Focus Diode Laser Module fitted to NEJE 3 Max Frame. Rated Power specs as per Manufacturer 12W+ Pulse Power or 11W Continuous Power Cutting test on 3mm Plywood Tested speeds from 150mm/min, 175mm/min upto 200mm/min at maximum 100% power. The Material used in this test was Hobarts 3mm LaserPlyLite Italian Poplar Plywood https://hobarts.com/products/laserply... All cut tests performed were 1 pass. Focus was set initally at 4mm according to manufacturer support then re ran all same tests at 3mm focus which was also as per manufacturer Air assist comes courtesy of a air system using Hyundai 24L HY7524 Compressor with air pressure set at 5 Bar and controlled via a secondary regulator at 35psi for this test. The same compressor is also used inline with co2 laser. Much better than things used such a Haliea pond pumps! Laser Module - NEJE E40 https://neje.shop/products/e40 Laser Engraver - NEJE 3 Max https://neje.shop/products/neje-3-max... Compressor - Hyundai 24L HY7524 https://hyundaipowerequipment.co.uk/h...