Venatian stucco metallics making on walls simply||Texture designing on walls|part-3 скачать в хорошем качестве

Venatian stucco metallics making on walls simply||Texture designing on walls|part-3

Venatian stucco metallics making on walls simply||Texture designing on walls Bedroom stucco marbled design New home paintings ideas Craft ideas Stucco part-2-Venatian stucco making on walls simply||Texture designing on walls    • Venatian stucco making on walls simply||Te...   Stucco part-1-Venetian stucco marbled bedroom !lessons|wall designing new    • Venetian stucco marbled bedroom !lessons|w...   Glow putty design-New glossy putty texture designing on walls|wall painting texture design ideas    • New glossy putty texture designing on wall...   Finiche material order-+91 98460 04588 Sain tech service call-9526914906 Stucco—-DESCRIPTION: An acrylic emulsion based decorative plaster with a natural marble appearance. Product is recommended for interior use. APPLICATION AREAS: Applicable to surfaces of rough plaster, concrete mineral surfaces, gypsum plaster, gypsum board, plywood and old painted surfaces. aktan rom ng SURFACE PREPARATION: Dirty, dusty and loose textured surfaces should be cleaned. Cleaning should continue until the surface salts are removed. On old painted and new painted surfaces, a coat of primer should be used beforehand. eyi izleyin n the Face APPLICATION: The product should be mixed until it becomes homogeneous. Thinning can be done with water to achieve the desired consistency but is not recommended. Once the primer application has dried, apply a single coat with a steel trowel. Before moving on to the second coat, make sure the first coat is fully dry. Apply the second coat, again with the help of a steel trowel. In order to achieve the desired effects and thicknesses, the trowel should be used in the appropriate manner. After the second coat is finished and fully dry, a third coat could be applied. While applying, pressure should be applied from the trowel on to the surface. This process is repeated until the required state has been achieved. lanmadan ce Karıştırın xwell fore using Mala ile Uygulayın Apply with a trowel DRYING TIME: At 23°C, touch dry time is 24 hours. Full drying time is between 48-72 hours. CONSUMPTION RATE: Depending on the surface structure, the YERLİ ÜRETİM theoretical consumption rate for a single coat application: - The coating consumption for an area of 1 m² area is 500-700 gr. SAFETY WARNINGS: R20-21-22: Harmful by inhalation, in contact with skin and if swallowed. Q2: Keep out of the reach of children. $24-25: Keep away from contact with skin and eyes. $26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice