Honda Element Condenser Fan Replacement скачать в хорошем качестве

Honda Element Condenser Fan Replacement

This Honda Element was overheating. When sitting in traffic, the car would get very hot, as soon as the car got moving again, the Honda would quickly cool back down. Overheating in this way is a strong indicator that one of the cooling fans is bad, in this case the condenser fan was the problem, not the radiator fan. So replacing the fan solved the overheating problem. When you are replacing the condenser fan, you could remove the upper cross member to allow for easier access to the radiator fan and condenser fan, but I have found that it takes longer and is more complicated than just squeezing and prying the fan out with the cross member in place. I have found that it is cheaper to replace just the fan motor and use the old shroud and fan, the fan motor in this video cost around $60. You can also get the whole fan assembly at amazon for around $65 (May 2016) http://amzn.to/20adE0P Tools Needed to replace the Cooling fan: 10mm Socket or wrench Philips Head Screwdriver Every repair situation is unique. ZipZapDIY cannot guarantee that your repair will be the same as depicted in this video. You should use this video as one information source of many, and you use this information at your own risk. Any tools, parts recommendations links used in this video must be verified by you to be applicable to your situation. ZipZapDIY cannot be held liable for any results from your improper use of tools or repairs. ZipZapDIY highly encourages you to seek out multiple sources of information regarding the repair depicted in this video. There is no warranty expressed or implied warranty or guarantee that you will experience similar results. You are solely responsible for the safe use of tools and equipment during your repair. http://zipzapdiy.com Tools and Parts on Amazon: http://amzn.to/2on8iab