Installation of the VRH (Variable Ride Height) for Onewheel GT, by Land-Surf. скачать в хорошем качестве

Installation of the VRH (Variable Ride Height) for Onewheel GT, by Land-Surf.

Here's a quick video to get you up to speed on the VRH system by Land-Surf. It's not hard to do, but you need to follow a specific set of steps for correct installation! ALL screws used in this system can use medium strength threadlock to secure the VRH in place. You don't need to use it for the adjuster (black) screw, as this seems to stay in place well without it, and makes height changes faster. NOTE: Do not disassemble the swingarm from the frame bracket (they come assembled). In other words, don't separate the black part of the VRH from the colored swingarm. The pivot screw that connects the two has some silicone lube on it so that the swingarm can rotate smoothly and not tighten or loosen the pivot screw. The pivot screw is secured with medium strength threadlock so that it does not loosen or come undone. Check often that the pivot screw is tight and not moving when you change ride heights. The VRH system can be purchased here: https://land-surf.com/products/vrh-va...