Counter pressure carbonated water test Rizzolio Isobaric filler RLV4-iSo скачать в хорошем качестве

Counter pressure carbonated water test Rizzolio Isobaric filler RLV4-iSo

COUNTER PRESSURE FILLER RLV4-iSo With four valves DESCRIPTION OF THE FILLING: The filling machine semi-automatic "RLV4-iso" is our latest creation It is possible to lodge it on 4 wheels for easy moving or on request 4 feet with a core of stainless steel and PVC base with adjustable height. Can also be installed on our blocks and triblock. The filling Counter pressure, it is suitable for filling sparkling beverages also like beer, sparkling wine, sparkling water, drinks etc ... Can also fill PET bottles through the use of special guides neck (optional) Using the two level sensors is handled getting the right product flow into the tank that has been tested up to 5 bar.   The tank, are 8mm thick and the 2 side covers facilitates its access to the ordinary and extraordinary maintenance. The filling inside the bottles is kind of anti-foaming, thanks to the rubbing ring , that distributes the product along the bottles walls The machine is built in accordance with current CE regulations. Current consumption 0,37kw   Air consumption at 6 bar: 120lt/min Low-voltage 24v  Power supply 220v 50/60hz  DIMENSIONS: L h 1.92 m 0.67 m 0.40 m P weight about 95kg attack produced 1 "female  Maximum diameter of bottle used 120mm height 350mm Working cycle: Before pre evacuation: in this first phase through the switching of the control lever pneumatic is created a depression within all 4 bottles simultaneously, by means of the first hole of the valves. This allows the suction of most of the air contained inside the bottles. Injection Co2 or N cleaned: through the second lever switching the command opens the duct of inert gas from the cylinder to the second hole of the valves which given the greater specific weight, has the function of concentrating in part of the neck the remaining part of the air present in the bottles. Second pre evacuation: the second pre evacuation as in the first has the same function but allows to suck the remaining part of the air present in the bottles. this second pre evacuation, allows a high level of hygiene and conservation of the product to be bottled. Pressurization (compensates from tank to bottles): by means of the fourth lever of the pressure contained in the filler tank is moved inside the bottles Filling: By means of the mechanical action of the spring, opening the valves of the liquid thus allowing the product to flow out inside the bottles. Through the appropriate baffles, the product forms a film against the walls facilitating the outside exit of the gas contained within. filling, ends when the product reaches the appropriate level channel (of different lengths depending on the bottles). Degassing: By means of the pressurizing lever, positioned in the rest phase, opens the third hole of the valve allowing the gradual exit out of gas present in the bottles, in the external environment.