Qidi Plus 4 Beacon UPDATE скачать в хорошем качестве

Qidi Plus 4 Beacon UPDATE

First of all .... Thanks to Stew675 on Discord for his amazing work with the script and gcodes to make this work 👍👍👍 So, just to show how the Beacon probe works now with details of how to set it up inside your slicer and some explanations of the process. This MOD will resolve the issues that we have with the z-offset on our QP4. Obviously, there is a cost to it as you need to buy the Beacon or there is also Spooknik MOD that uses the Cartographer3D probe for a lesser price. Both are based on the same principles but, Beacon, for my own opinion, is better for higher heat tolerances and precisions .... but they both work well 😉 Keep in mind that, this MOD implicates that you follow completely Stew's install or else you will not end up with good results and that, nor QIDI, nor any of us are responsible for any mistakes or issues this could bring up. Just follow carefully the explications 😁😉👍 Links to everything about the Beacon and prints. I will also include my own link for my print setup as mine is installed where the OEM probe was instead of being in front. Only the X-Y need to be adusted to this support so, make sure you input the right coordinate 😉👍 LINKS: My print side install: https://www.printables.com/model/1165... My install setup : https://github.com/FxWoody/Qidi-Plus-... Stew675 full install: https://github.com/qidi-community/Plu... Spooknik Carto: https://github.com/qidi-community/Plu... Hope this will help a few and remember to like and follow us on Discord or Facebook QidiTech 😉😁👍 https://www.facebook.com/groups/qidit...   / discord