Mosquito Sniper System assembly and review with Husqvarna blower. DIY mosquito sprayer! скачать в хорошем качестве

Mosquito Sniper System assembly and review with Husqvarna blower. DIY mosquito sprayer!

Recorded June and July 2020. Showing the assembly and use of the Mosquito Sniper System with a Husqvarna 125B blower. It's quite simple, replace the end of a garden sprayer with their tubing and attach the bracket to the end of your blower's tube with a hose clamp. Put the blower on full speed and squeeze the sprayer lever. Assembly took just a few minutes and required no tools besides cutting a ziptie for the tank hose. With my blower, it can easily spray 20 feet and get a decent height into the trees. Would highly recommend this for homeowner use! https://mosquitosnipersystem.com/ Tips I learned: Brace the blower against your thigh to get the higher spray angles with less wrist fatigue. And, snap the spray lever into the tank handle (if using a nicer tank like the one in the combo from MSS), so you can control it with your thumb while you hold the tank. The HDX tanks from Home Depot work well, too. I broke the hand pump on the MSS tank after 2 years and was able to move the MSS hoses over to a HDX tank. Hope the video was helpful, I couldn't find any others about it when I was considering ordering this, but figured it was simple enough to take the risk. And it definitely was! 0:00 Unboxing and assembly 3:15 Close-up 3:27 First Use 6:32 Post-use thoughts 7:27 One month followup