У нас вы можете посмотреть бесплатно Impressive floor styling and renovation with the transfer technique или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
With the transfer technique shown here you can have the most varied designs and styling on your floor -- for example company logos, signposts, or one of over a hundred ready-made design motifs from the Dr. Schutz Design Collection -- these are artistic, decorative, playful -- your choice is almost unlimited ! In the case of larger motifs, like this one, the backing foil is fixed with adhesive tape. Afterwards the plastic foil is rolled up again, so that a Dr. Schutz PU sealer can be rolled onto the floor in order to fix it. Here PU Sealer gloss is used. After a short airing time, the foil is unrolled directly onto the still moist sealer -- be careful not to apply too much sealer. Excess sealer and air-bubbles are evened out, using a plastic spatula. The sealer fixes the floor design motif after a short drying time. When the sealer has dried, the backing foil can be peeled off. For this a clean, wet cloth is used, or in the case of larger areas a clean mop with water which is applied onto the backing foil. Afterwards you can peel the damp backing foil from the floor -- the motif is now embedded in the sealer layer lying underneath, or rather has been transferred to the floor! Finally, the area is sealed with a transparent renovation sealer from Dr. Schutz. Here Super PU Sealer mat or satin is used. The matt sealer interplays with the layer lying underneath, with its motif and sealer -- thus creating a beautiful, balanced image. The final sealer is hard-wearing and provides the floor and its embedded motif with long-term protection against scratches and friction damage. The last coat of sealer should have hardened about 12 hours after drying, before it can be walked on carefully. On our website hhttps://www.dr-schutz.com/en/dr-schutz/ you can find all the motifs of the Dr Schutz Design Collection, as well as additional information about using and working with our products. You can easily do floor styling and floor renovation on your own. And don't forget to follow us on social media: LinkedIn: / dr-schutz-group Instagram: / dr_schutz