DIY Rotary table chuck adapter for mini milling machine скачать в хорошем качестве

DIY Rotary table chuck adapter for mini milling machine

#proxxon, #chuck, #milling, #metalworking This video shows the idea and process of making a very simple adapter that allows the 3-jaw chuck from a Proxxon #PD250 lathe to be used as a simple rotary table for a Proxxon #FF230 mini milling machine. I used inexpensive and very popular M1.5 stainless steel gears – these can be purchased at most hardware stores or popular Chinese online marketplaces. In my project, I used 60-tooth, 20-tooth, and 15-tooth gears – this ratio always divides perfectly for the most common full-angle divisions and further increases rotational precision. Two clamps eliminate the rotational backlash on the gears - when rotating, I use the first clamp to press down on the brakes and with the right gear I pull it to the correct position and then finally tighten the second clamp. Finally, I added a circular angular scale – it was laminated to be resistant to dirt, oil, coolant, etc. To protect the gears from milling chips, I made a protective plate from Plexiglas – I cut it using a #Snapamaker CNC module. The model was designed in the free version of Fusion 360 - which was also used as CAM for the CNC work and to create the animations shown in this video. ---------------------------------------------------------------------------------------------------------------------------------- Music: Ethereal Guitars by Alexander Nakarada (https://www.creatorchords.com) Licensed under Creative Commons BY Attribution 4.0 License https://creativecommons.org/licenses/... ----------------------------------------------------------------------------------------------------------------------------------