Franklin Armory BFS III Trigger Installation скачать в хорошем качестве

Franklin Armory BFS III Trigger Installation

Franklin armory trigger BFS III installation and instructions. We are working on assembling an AR-15 lower receiver with a Franklin Armory BFS3 binary trigger and pairing it with a Fox Trot Mike side-charging upper receiver. Here's a quick breakdown of the key steps from your video: 1. **Prepare the Parts**: The parts include the fire and safety selector, trigger springs, trigger pins, and the shelves needed for the binary trigger system. Be very cautious when handling the trigger group as it has a silver pin that holds the assembly together. 2. **Trigger Installation**: When installing the trigger, make sure the springs don’t fall into the trigger’s hole. Use a trigger pin to secure the trigger into place. 3. **Anti-Walk Trigger Pins**: To prevent the pins from coming loose, you're using an anti-walk trigger pin kit. Carefully line up the holes and tap the pins into place, ensuring the silver pin stays intact throughout the process. 4. **Hammer Installation**: The hammer is installed next, ensuring the shelves are in place. Line it up with the holes in the receiver and secure it. 5. **Fire and Safety Selector Installation**: When installing the selector, make sure the hammer is down. Without the hammer in the down position, it could be difficult to install. Also, the fire selector doesn't come with its own detent or spring, so those need to be sourced separately. 6. **Testing the Trigger Functions**: Once the trigger is installed, check the reset function to ensure everything is working properly. Test the binary function by pulling the trigger and releasing it, making sure it cycles the hammer correctly. 7. **Final Assembly**: Once everything is assembled, apply some blue Loctite on the fire selector parts and ensure the ambidextrous selector lever is installed correctly. 8. **Safety Check**: After everything is installed, perform a function check, testing the semi-auto, binary, and safe modes to make sure everything is working properly. It looks like you're doing a great job with these installs! Don’t forget to subscribe to your channel and thank your viewers for their support.    • Part 1: Dangerous malfunction with the Fra...