How to use the STERILANCE Lancet Device скачать в хорошем качестве

How to use the STERILANCE Lancet Device

How to use the SteriLance Landing Device Read Our Full Blog Here: https://www.binsons.com/blog/post/how... Let’s look at how to use the SteriLance Lancing Device. Available on our website and included with new diabetes testing kits, this tool makes it simple to draw blood for traditional glucometer testing. We have a video for more visual learners, as well as step-by-step instructions with pictures. Blood sampling from a finger Wash the test site with soap and warm water, then dry completely. Prepare the test site with a 70% Isopropyl Alcohol prep pad. Before lancing, gently rub your arm from the wrist to the base of the finger. This will help to get better blood flow and allow a good blood drop to form. Select a site on the outer edge of the finger for the best blood drop and least bother. Do not squeeze or massage your finger after lancing. WARNING: Single Patient Use Only. Do NOT share your lancing device with anyone, not even family members. Sharing your lancing device may cause the spread of infections or diseases to YOU and other persons. Not to be used for assisted blood draws by healthcare providers or at healthcare provision sites. Use a NEW sterile lancet each time you test. Clean your device after each use. Do NOT use if the device and/or lancet appear damaged. Do NOT use lancets that do not fit properly in the lancet holder. Do NOT use a lancet, if after insertion into the device the needle is protruding through the end cap. Failure to use the device properly may result in inaccurate readings or error codes on the meter. Any setting where finger stick procedures are performed, including assisted living or residential care facilities, hospitals skilled nursing facilities, clinics, health fairs, shelters, detention facilities, senior centers, schools, camps, etc. Instructions 1. Remove the end cap (A) by twisting it counter-clockwise while holding the body of the SteriLance device face-forward (E). Lancets must be compatible with your device to fit properly in the lancet holder. 2. Insert a lancet body/cap (B/C) firmly into the lancet holder (D) until it clicks into place. 3. Remove the protective lancet cover (C) by holding the SteriLance device body (E) and the lancet (B) firmly with one hand. Twist/pull off the lancet cover (C) in a straight direction with the other hand to avoid bending the lancet tip. Note: Do NOT touch the lancet tip to retain sterility. WARNING: Do not touch the lancet tip. The sterility of the lancet is maintained until the cap is removed. 4. Replace the end cap (A) by twisting it clockwise onto the SteriLance device body (E). Ensure end cap (A) is securely locked in place, otherwise, the device may not function as intended. 5. Select the skin penetration depth by twisting the depth selector clockwise or counterclockwise (F) to the desired depth (G). The SteriLance offers 6 levels of depth settings indicated by numbers. Numbers 1-2 are for soft skin; 3-4 for average skin, and 5-6 for thick or calloused skin. 6. Pull back on the SteriLance arming mechanism (H) located at the back of the device until it comes to a stop. The arming mechanism will return to its original position upon release. If not, the device may not function as intended. The orange release button (I) will pop up when the SteriLance is ready-to-use for blood sampling. 7. Place the SteriLance firmly against the finger and press the release button (I) to obtain a blood sample. The lancet will return to a retracted position after use. 8. After finishing your blood test, remove the SteriLance end cap (A) and use the lancet ejector (J) to eject the lancet (B) safely into an appropriate sharps container. We hope the information we shared was useful. If you are a current Binson’s customer and you need to order more supplies, we recommend you check out our easy online ordering. If you are interested in becoming a Binson’s customer, we would love to have you! To get started, fill out our online enrollment form. Thanks for reading! The Most Trusted Name For Home Health Care Products & Services Founded in 1953, Binson’s is an industry leader and the most trusted name for home health care products and services. We serve the state of Michigan as well as patients across the United States and internationally. Binson’s offers a wide variety of products and support services including home delivery/set-up and convenient walk-in service centers that are fully stocked and staffed with experienced personnel. We are here to serve you and your patients anytime a medical need arises whether upon discharge, while at home, or in any other healthcare setting. https://www.binsons.com Twitter:   / binsonsmedical   Facebook:   / binsonsmedicalsupplies   Instagram:   / binsonsmedicalequipment