#What скачать в хорошем качестве

#What

Disassembling a Shure SM7db microphone requires care to avoid damaging its delicate internal components. Let me walk you through it step by step! Tools you might need: screwdriver 4T Medium Size Flathead screwdriver or spudger Tweezers (optional, for handling small parts) Soft cloth or mat (to protect components) Step 1: Remove the Windscreen and Yoke Mount Windscreen: Gently pull off the foam windscreen. It’s just press-fitted, so no screws here. Yoke Mount: Use a screwdriver to loosen the side screws on the yoke mount (the part that connects the mic to a stand). Remove the screws and carefully slide the yoke off. Step 2: Access the Rear Panel and Switches Back Panel: You’ll see the rear panel with the high-pass filter and presence boost switches. Use a small flathead screwdriver to carefully pry the panel open. Disconnect Switch Board: Gently unplug the switch board if necessary (it might have a small connector or be soldered — handle with care). Step 3: Open the Microphone Housing Loosen Screws: Look for screws along the body tube — there should be small screws that hold the metal housing together. Unscrew them carefully. Slide the Shell Off: Once the screws are out, slide the outer shell or body cover off to reveal the internal components. Step 4: Handle the Internal Components Circuit Board and Transformer: You’ll see the circuit board and preamp section (since the SM7db has a built-in preamp). If you need to access deeper components, carefully unscrew the PCB from the housing. Diaphragm and Capsule: If you need to access the microphone capsule itself, handle it with extreme care — even small damage can ruin sound quality. Step 5: Reassemble Carefully Reverse the Steps: After repairing or inspecting, carefully put everything back together in reverse order. Test the Mic: Before fully tightening everything, plug the mic in and test to make sure it’s working properly.