How to wire wrap a front top drilled gemstone drop bead. скачать в хорошем качестве

How to wire wrap a front top drilled gemstone drop bead.

wire gauge depends on size of hole in the stone ( stone size, hole size)! If you use the wrong wire you could break the stone* You will need 22 gauge wire a front top drilled stone pendant round nose pliers wire cutters and chain nose pliers cut about 2 feet of wire for each earring.  1. Push the wire through the top of the stone from the back to the front.  2. Have the longer portion of the wire out of the front of the bed, facing front and a shorter amount of wire in the back of the stone. You want about 2 inches of wire from the back and the remaining in the front.  3. Bend the wire from the front up and over the top of the bead. Take the wire from the back and push up and over the top of the bead forming an X over the top.  4. Take your round nose, pliers, and take the shorter wire and form a loop over the top of the stone. 5. Take the longer wire from the front of the stone and wire wrap around underneath the loop you created at the top of the stone. Form coils around the stone. Wire wrap until you’ve reached the hole in the stone and wire over it in a circular motion, going around the stone. When you’ve reached desired length, go back up around previous made coils in diagonal form and continue until you’ve reached the top loop. Cut off excess wire and pinch closed *** You can reach me at ⤵️ Andria Bieber Designs www.andriabieberdesigns.com Love this tutorial buy me a coffee! Buy me a coffee at Venmo @ andria-bieber or send paypal dontation: paypal.me/andriabieberdesigns ****