Lamborghini Sian Licensed 12v Electric Kids Ride On Car Assembly Instructions скачать в хорошем качестве

Lamborghini Sian Licensed 12v Electric Kids Ride On Car Assembly Instructions

Here's the Lamborghini Sian Licensed 12v Electric Kids Ride On Car Assembly Instructions. RESOURCES & LINKS: ____________________________________________ For more info on this car, visit: http://bit.ly/LamborghiniSianRideOn Take a look at the promotional video -    • Lamborghini SIAN Licensed  12v Battery Ele...   Our ride-on cars - https://riiroo.com/collections/ride-o... Our ride-on motorbikes - https://riiroo.com/collections/electr... Our ride-on scooters - https://riiroo.com/collections/riiroo... ____________________________________________ Here are the instructions: 1. Take a look at the parts list and ensure you have all the items to build. 2. You will also need a Philips head screwdriver. 3. Please refer to the parts list in the manual. 4. Protect and place the car on a flat surface. 5. Remove the elastic band securing the motors. 6. For the rear wheels, ensure the assembly order of the hardware is as follows – wheel – washer – & finally the split pin. 7. Attach the rear wheel trim to the relative gaps on the wheel. 8. Repeat the process on the other side. 9. Remove the elastic band securing the motors. 10. For the front wheels, ensure the assembly order of the hardware is as follows – washer – wheel – washer – & finally the split pin. 11. Attach the front wheel trim to the relative gaps on the wheel. 12. Repeat the process on the other side. 13. Connect the steering wheel wire to the multiplug protruding from the steering console. 14. Ensure the wire is threaded back through the console once connected to prevent damage. 15. Attach the steering wheel to the steering rod. 16. Connect the battery terminal. 17. Once battery terminals are connected check to see if the car powers up. 18. Attach the front windshield to the relative gaps on the bonnet. 19. Attach the wing mirror by pushing it into place until you hear a click. 20. Repeat the process on the other side. 21. Insert 2 AAA batteries into the remote control. 22. Refit battery cover with screws. 23. Ensure the car is turned off before pairing the remote. 24. Pair the remote by holding the button on the remote whilst turning on the car. 25. The remote should be paired when the LED’s on the remote stop flashing. 26. Remove the screws as shown. 27. Repeat the process on the other side. 28. Slide seat onto the brackets. 29. Secure the seat with screws on both sides. ► If you need help choosing a ride-on toy for a present, then check us out @ https://riiroo.com/ ► Subscribe: http://bit.ly/RiiRooSubscribe to see more videos on our ride-on toys. ► Find us on Facebook:   / riirooltd   #LamborghiniSian #lamborghiniforkids #kidslamborghinicar