Скачать с ютуб 02 Table lamp Ending with the ‘Wolverine’ CNC Gantry Robot в хорошем качестве

02 Table lamp Ending with the ‘Wolverine’ CNC Gantry Robot

This CNC gantry robot shows the results of our efforts to build our own little CNC machine from scratch. A detailed description of it can be found in Elektor Magazine: part 1: issue 3/2019, page 52, https://www.elektormagazine.com/magaz... part 2: issue 5/2019, page 26, https://www.elektormagazine.com/magaz... part 3: issue 11/2019, page22, https://www.elektormagazine.com/magaz... This video shows a compilation of some tests we carried out with the machine and some results we achieved. Please note that this is a prototype and that the project is subject to change. Software used: Eding CNC Starter Software Release for CNC310 DraftSight EstlCAM Some specifications: • work surface area about 50 × 30 cm • linear glides with polymer bearings, insensitive to contamination • maximum speed of X and Y axes: 15000 mm/min, Z-axis: 750 mm/min • repeatability: about 0,2 mm • nema-17 stepping motors • driven via reinforced GT2 toothed belts (X and Y axes) and screw spindle (Z-axis extension) • Z-axis extension suitable for drilling, milling and engraving in wood, plastics and non-ferrous metals (aluminium, bronze). Using Proxxon LBS/E spindle (5,000 – 20,000 rpm, 100 W) • professional drivers and software from Eding CNC (cnc310 controller board) • stepping motor drivers based on Trinamic TMC2160 controller IC’s for silent operation • 2.5D software extendible to full 3D • multi-functional design, can be extended for other applications • can be extended with a pendant (= console with buttons and wheel for manual control) • maximum power consumption without drill/grinder: about 100 W • total mass of the machine including Z-axis extension and Proxxon LBS/E drill/grinder: 24 kg