У нас вы можете посмотреть бесплатно How to Get Top Performance with a Brass Breech | Nerf Blasters или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
If you're going for top performance (300fps+) you'll have to go with brass. However, brass can be extremely finicky, so I wouldn't recommend brass to nerfers just getting into the hobby. If you're getting a brass setup, you need to know how to properly use and maintain your blaster, or you will likely break or bend your breech. My recommendations: Stick with new, half-length darts Unless you have a well-maintained system, don't rapid fire brass Always use eye protection Use the modified muzzle prints instead of the default so as to not deform your barrel Have a ton of fun *Update: The aluminum ram doesn't leak anymore. We've addressed this issue by used two o-rings on the ramtip and/or making the o-ring notch taller and/or using a slightly larger o-ring. Stuff you can get at my shop: Brass Barrel for Caliburn/Talon Claws: https://frontlinefoam.com/product/bra... Ramrod for Caliburn: https://frontlinefoam.com/product/ner... Aluminum Cover for Brass: https://frontlinefoam.com/product/alu... Caliburn Hardware Kit: https://frontlinefoam.com/product/cal... Talon Claw Hardware Kit: https://frontlinefoam.com/product/ner...