Bernina Fix - No Slow Speed - Runs Full Speed Only - Type 289 + 287 Foot Controller Repair скачать в хорошем качестве

Bernina Fix - No Slow Speed - Runs Full Speed Only - Type 289 + 287 Foot Controller Repair

If your Bernina sewing machine only runs at full speed and you have the Type 289 (or 287) foot controller then this video may help you repair it yourself. If you have this problem with your machine, you may notice there is no slower speeds and no acceleration ramp up. When you put your foot flat on the controller the machine takes off at full speed. Generally this is just a failed or failing capacitor which is fairly easily replaced with a readily available capacitor. I also show what the adjuster screw on the bottom of the controller does. Please consider helping out the channel by becoming a patron.   / sewingmachines   Contributions go towards the running of the channel and you get early access to some videos. You can also get access to exclusive content. Index: 0:00 - Introduction and explaining the fault 2:38 - Removing the foot pedal from the controller 6:46 - Partially removing the circuit board 10:42 - Identifying the faulty capacitor and replacing it 13:30 - Assembling the foot controller 22:22 - Testing 23:45 - Explaining the screw adjuster under the foot controller 25:02 - Conclusion and thanks Web Site - http://www.institches.co.nz