Single Rail Positioning Stage | H-Gantry скачать в хорошем качестве

Single Rail Positioning Stage | H-Gantry

Each linear axis uses H2W brushless linear motor BLDM-B04. Each axis has a total stroke length of 25.67 in [652 mm]; can generate 6.2 lbs [27.8 N] of continuous force and 18.7 lbs [83.3 N]] of peak force, or a combined 12.4 lbs [55.6 N] continuous force and 37.4 lbs [166.6 N] of peak force on the bottom axis. The non-contact 1.0-micron resolution encoders allow for precise positioning. Each moving table is guided by a rigid recirculating ball linear bearing. Each linear axis is assembled on a single piece of aluminum extrusion, thus reducing the overall weight of the system. The top cross axis is mounted to the bottom parallel axis using rigid aluminum extrusions, 90° right angle gussets, and custom extrusion end plates. The entire system is assembled on a flat tooling base plate. There are also provisions that allow customer cables to be routed within the cable carriers. It has end-of-travel rubber bumper stops. A home positioning sensor, end-of-travel-sensors, and custom mounting holes on the moving table are available upon request. Features: Low system weight Built using standard extrusion profiles Cable carriers to route payload cables Two axis of coordianted motion Single extrusion length up to 6.0m long allowing for long strokes - Ability to run multiple motors on single magnet track - Ability to run multiple encoder heads reading a single encoder scale For more information, please visit: https://www.h2wtech.com/page/single-r...