Tim's Barrel Taper Tool скачать в хорошем качестве

Tim's Barrel Taper Tool

Tim's Barrel Taper Tool allows you to make barrel tapers on your shafts. The original definition of "barrel" described an arrow shaft that was shaped like a barrel stave. The finished shaft curved from a small diameter at one end to the largest diameter in the center and back to a small diameter at the opposite end. In contemporary times a "barrel" tapered shaft has both ends tapered, but the tapers are straight. This taper tool does make a small curve or parabolic shape on the arrow shaft, but it does not make a barrel stave shaped shaft. One end only (single taper) can be done with this tool or both ends of your arrow shafts may be tapered, thus making "barrel" tapered shafts in the contemporary sense. Please note, this video shows how to use the Barrel Taper Tool on a combination sander only. The set up takes less time on the table saw, but the adjustment of the tool is the same on the table saw as the combo sander. The 10" sanding disc and 120 grit sanding discs needed for use with the Table Saw are commonly available at woodcraft stores.