EASYGLIDER PRO ELECTRIC/ GLIDER FOR DIRECT DRIVE BRUSHLESS MOTORS скачать в хорошем качестве

EASYGLIDER PRO ELECTRIC/ GLIDER FOR DIRECT DRIVE BRUSHLESS MOTORS

FEATURES: •Elapor foam to resist damage •White in color •Wings: Two piece with fiberglass wing joiner •Spinner: Elapor foam 2.2" (55mm) diameter •Aileron Control: Dual servo •"Full House" Control Surfaces: Elevator, Rudder and Ailerons INCLUDES: •One (1) Multiplex Easy Glider Pro with decal sheet, foam spinner, wing joiner, pushrods, hardware and illustrated instruction manual REQUIRES: •Radio System: 4-channel (min) with micro receiver •Servos: Two (2) micro size for elevator & rudder Two(2) nano size for ailerons •Servo Extensions: Two 16" (200mm) for aileron servos Y Harness: For aileron servos •Battery: at least 2100mAh •Battery Charger: LiPo compatible If building as glider only the following items are required; •NiMh Receiver Battery (at least 1800mAh) •Switch Harness with Charge Jack •Launching Kit SPECIFICATIONS: •Wingspan: 71" (180.3cm) •Length: 43.7" (112.3cm) •Flying Weight: 28.5oz (810g) with standard power system •Wing Loading: 6.5 oz sq ft (20 g sq/dm) with standard power system •Wing Area: FAI approx. 226 sq in (41.6g/sq dm) •Airfoil: Semi symmetrical •CG (centre of gravity): 2.7" (70mm) from leading edge at wing root •measured at fuselage side Additional Info: This model is NOT made of styrofoam and it is not possible to glue the material using white or epoxy glue. Medium C.A. glue used with an activator is the only method of gluing recommended by the manufacturer. (The soundtrack is a copyright free track called flux by Michael c. brewer.)