Vers WLR v.2 Binding to another receiver скачать в хорошем качестве

Vers WLR v.2 Binding to another receiver

1. Turn off all Vers devices in the same room. 2. Connect the bundled USB cable to the bindable receiver and probe. 3. Erasing flash memory: while holding down the "erase" button, turn ON the receiver ONLY, the probe button must be OFF. Release the "erase" button and turn OFF the receiver, disconnect the USB cable. The flash memory was cleared both in the receiver and in the probe. 4. Writing information about a new partner to flash memory: with disconnected USB cable turn ON the receiver, turn ON the probe. The receiver and probe automatically connected without wire, exchange and store partner information in permanent memory when first turned ON.