Make Your Own Colloidal Copper скачать в хорошем качестве

Make Your Own Colloidal Copper

This video is showing you one way to make colloidal copper. This colloidal copper is a CONCENTRATE. That means you will make it and store it, and add it to some water for your final dosage, which will be 10 ppm, 2-3 times per day, or more when ill, etc. You will need a 12 volt battery charger with clamps, set at 10 amp, one quart of distilled water, a pinch of sea salt, or a pinch of citric acid. Two 12 inch pure copper wires, a small piece of cardboard, large rubber band or duct tape, and a TDS meter (optional) Depending upon the gauge of copper wire, and time allowed to charge the wires, your ideal dosage per day will be 10 ppm as needed or two-three times per day. So you will need your TDS meter to test your individual glass of dosage water AFTER you have added your colloidal copper concentrate. You will have to do this a few times with each solution until you know how many drops or teaspoons to add. Don't be afraid to experiment. You are your own healer!    • Copper the LAST Cure of Your Life      • Fear Is Magnetic. Permanent CURE of Fear t...