today we changed engine oil of yamaha fz at home … with 3m flush & 3m engine oil additive and shell. скачать в хорошем качестве

today we changed engine oil of yamaha fz at home … with 3m flush & 3m engine oil additive and shell.

For an engine oil change on a Yamaha FZ V3 using Shell 10W-40, here’s what you need to know: Compatibility • Shell Advance 10W-40 (fully synthetic or semi-synthetic) is suitable for the Yamaha FZ V3, which has a 149cc air-cooled, 4-stroke engine. The recommended oil grade for this bike is 10W-40, API SL, JASO MA/MA2, as per Yamaha’s specifications. • Shell Advance Ultra or AX7 10W-40 are good options, offering high shear stability, smooth clutch operation, and reduced engine vibrations. • Ensure the oil meets JASO MA/MA2 standards to prevent clutch slippage, as car oils (lacking these standards) can cause issues. Oil Change Procedure 1. Preparation: • Gather tools: 17mm wrench, oil filter wrench, drain pan, funnel, and a new oil filter (Yamaha OEM recommended, part compatible with FZ V3). • Get 1 liter of Shell 10W-40 oil (FZ V3 requires ~1L with filter change). • Warm up the engine for 2-3 minutes to make the oil flow easily. 2. Draining Old Oil: • Place the bike on its center stand on a flat surface. • Position the drain pan under the engine. • Remove the drain bolt (17mm) and let the old oil drain completely (10-15 minutes). • Optionally, remove the oil filter (replace every 2nd oil change or if dirty). 3. Replacing Components: • Install a new oil filter if replacing (apply a thin layer of new oil to the filter’s O-ring). • Reinstall the drain bolt with a new crush washer and tighten to 30 Nm (check manual). 4. Adding New Oil: • Use a funnel to pour ~0.9L of Shell 10W-40 into the oil filler cap. • Check the dipstick, top up to the max mark (total ~1L). • Start the engine for 1-2 minutes, then check for leaks and recheck oil level. Oil Change Interval • Change the engine oil every 3,000 km or 6 months, whichever comes first, as recommended for the FZ V3. • First service (1,000 km) and third service (10,000 km) include oil changes; refer to the user manual for specifics. Notes • Why Shell 10W-40? Users report smoother gear shifts, reduced engine noise, and better heat management compared to mineral oils like Yamalube (grey/yellow bottle). • Alternatives: Motul 5100/7100 10W-40 or Castrol Power1 10W-40 are also compatible, but Shell is cost-effective and performs well for a 150cc engine. • Warranty Concerns: Some Yamaha service centers claim using non-Yamalube oils may void the engine warranty for the first 5 services. Verify with your dealer to avoid