How to Replace Front Lower Control Arms 2015-2020 GMC Yukon скачать в хорошем качестве

How to Replace Front Lower Control Arms 2015-2020 GMC Yukon

Buy Now! New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ic-1ASLF00969 This video shows you how to install new front lower control arms from TRQ on your 2015-2020 GMC Yukon. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This repair was done on a 2017 GMC Yukon XL SLE 5.3L Sport Utility 4-Door Automatic and the process should be similar on the following vehicles: 2015 GMC Yukon XL 2016 GMC Yukon XL 2017 GMC Yukon XL 2018 GMC Yukon XL 2019 GMC Yukon XL 2020 GMC Yukon XL Tools you will need: • Pry Bar https://trq.video/o4m-1AXAA00020 • 15mm Wrench https://trq.video/o7E-1AXAA00010 • 18mm Wrench • 21mm wrench • 10mm Socket https://trq.video/obwq-1AXAA00017 • 15mm Socket https://trq.video/obTa-1AXAA00015 • 21mm Socket • 22mm Socket https://trq.video/oq3-1AXAA00266 • 24mm Socket • 1/2 Inch Impact Gun https://trq.video/owZ-1AXAA00252 • 3/8 Inch Impact Gun • Air Chisel • T30 Socket • 1/2 Inch Breaker Bar https://trq.video/ore-1AXAA00078 • Ratchet https://trq.video/obVR-1AXAA00016 • Torque Wrench https://trq.video/oaYW-1AXAA00044 • Anti-Seize Grease • Gloves https://trq.video/oaIH-1AXSS00048 • Safety Glasses • Floor Jack https://trq.video/oanZ-1AXAA00068 • Hammer • Pole Jack • Rubber Mallet • Wheel Chocks • Wire Brush https://trq.video/owi-1AXAA00079 Subscribe:    / @trq   Check out our playlist: GMC Yukon 2015-2020 4th Gen:    • GMC Yukon 2015-2020 4th Gen   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.